Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (2024)

Blog Featured

by ScreenCraft- updated on September 16, 2019

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (1)

Three is a very satisfying number. In the world of drama especially, the number three is king when it comes to just about anything. After all, there are three actions in a film. The first act sets up the drama, the second has everything go to hell, and the third sports the story’s resolution. But if you look at any single sequence with a dramatic set up in an action film, we’re guessing you can probably see three iterations of something.

The idea here is the same as an act structure — if the good guys have to do a thing three times it allows you to show it done regularly the first time, have the second attempt be a complete mess, and then feature a dramatic resolution for the third.

A really strong example of this rule of three can be found in 1996’s franchise standoutStar Trek: First Contact. The second act features a really inventive action sequence that clearly didn’t have much budget to work with, so they employed the rule of three to squeeze as much suspense they could out of its seven minutes of runtime.

Have you written the next great action film?

What’s the set up?

The Enterprise is in the past and slowly being taken over by techno-zombies called the Borg. Captain Picard, Worf, and Lt. Hawk have to spacewalk to the ship’s main deflector and prevent the Borg from building a communication array that would send an SOS to their past selves, leading to horrific invasion that would mean the end of humanity.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (3)

How do the good guys plan to accomplish their goal?

They have to detach the deflector dish, which means disengaging three maglocks without being taken out by Borg drones.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (4)

What disadvantages do the good guys have?

Well, they can fire one shot at the bad guys before their weapons become useless as The Borg adapt. The Borg also don’t need space suits to survive in a vacuum, so there’s that.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (5)

Where does the rule of three come in?

As each crewmember tries to use the maglocks, they find their access is denied because of the changes the Borg have made to the ship.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (6)

Picard’s attempt to access the maglock doesn’t draw much attention.

Worf’s gets a significant glance… but a drone goes after Hawk, who uses their one shot to defend himself.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (7)

So far, so good. That’s your first round of threes.

What’s the next round of three?

We’ve reached the main event. Now that the maglocks are all accessible thanks to some manual overrides, it’s time for our heroes to turn heavy switches.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (8)

Unfortunately, now the Borg are on to their plan.

Just as Worf engages his lock — it’s easy for him so we can see how it’s done — a drone comes after him. Worf manages to kill it with a Klingon blade...

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (9)

... but his suit is punctured and the decompression takes him out of the fight. They just lost their best guy.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (10)

What about the other two good guys?

While Hawk is trying to turn his switch, a drone overtakes him. That right there is a textbook second objective complication.

Picard manages to disengage his lock and evade a drone just in the nick of time by turning off his gravity boots and floating to the other side of the dish.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (11)

What what’s the situation of the drama now?

Two of our good guys have been taken out. There’s one more lock left to disengage, but the Borg have completed their array and are about to transmit. Picard has to get to it and destroy the array before it’s too late.

Do things get worse? They sure do! Picard manages to disengage the last maglock, and just as he's about to deliver the final shot with his rifle he gets attacked by Hawk… who is now a Borg!

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (12)

Hawk beats Picard up and is about to kill him when —

I sense a resolution coming…

Yup! Borgified Hawk is shot by Worf, who tied off the decompressed part of his suit with a dead Borg’s wiring.

Picard severs the array off from the ship, and Worf destroys with the one-liner, "Assimilate this."

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (13)

He fires and destroys the array.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (14)

Everyone — excerpt poor Hawk — goes home happy.

What's the take away here?

Action sequences should be treated the same as the larger story they inhabit. They have a beginning, middle, and end. One of the easiest ways to frame that structure is to give your characters three things to accomplish. It could be three different tasks, but most of the time — for simplicity's sake — it's the same objective that must be accomplished three times.

Another great example of this structure is Captain America: The Winter Soldier's third act. If you recall, their objective in that action sequence is to reprogram three helicarriers. The first carrier goes fine, the second one is difficult, and for the third they have to find out a creative solution which involves destroying it with the hero still inside.

Don't be afraid of the number three. It may seem like a troupe, but it's one of the most effective ways to structure your drama.

Ashley Scott Meyers is a screenwriter and podcaster over at SellingYourScreenplay.com. He has sold and optioned dozens of scripts over the last two decades. Through SYS he runs a screenplay analysis service, provides paid job leads to screenwriters, and helps screenwriters connect with producers who are looking for material.

Tags

Action Movies, movies, Science Fiction, screenplay, screenwriting, screenwriting advice, Star Trek, star trek first contact, writing, writing tips

Get Our Screenwriting Newsletter!

Get weekly writing inspiration delivered to your inbox - including industry news, popular articles, and more!

Facebook Comments

As a seasoned expert in the realm of storytelling and film, it's evident that the use of narrative structures and thematic elements is crucial for creating compelling cinematic experiences. The article you've shared, featured by ScreenCraft and updated on September 16, 2019, delves into the significance of the "rule of three" in storytelling, particularly in the context of action sequences within films.

The author highlights the omnipresence of the number three in the world of drama, emphasizing its role in structuring not just entire films but also individual sequences within them. Drawing attention to the three-act structure, the article provides a detailed analysis using the 1996 film "Star Trek: First Contact" as a prime example.

In the discussed sequence from "Star Trek: First Contact," the rule of three is applied to an action set piece involving the protagonists—Captain Picard, Worf, and Lt. Hawk—trying to prevent the Borg from building a communication array. The objective is to detach the ship's deflector dish by disengaging three maglocks, and the complications arise from the adaptability of the Borg and the limited resources of the protagonists.

The article breaks down the sequence into two sets of three, demonstrating how the rule of three adds layers of suspense and complexity to the action. The first set involves the attempts of each crew member to use the maglocks, with complications arising at each step. The second set, the main event, focuses on turning heavy switches, introducing further complications as the Borg catch on to the heroes' plan.

The author emphasizes the importance of treating action sequences as integral parts of the larger narrative, with a clear beginning, middle, and end. The rule of three, in this context, suggests giving characters three tasks or iterations of the same objective to accomplish, providing a framework that enhances the storytelling.

To reinforce this concept, the article cites another example from "Captain America: The Winter Soldier," where the third act revolves around reprogramming three helicarriers. Each attempt to accomplish this objective presents escalating challenges, adhering to the rule of three and contributing to the overall effectiveness of the action sequence.

In conclusion, the takeaway from the article is a valuable piece of advice for screenwriters and storytellers: don't be afraid of the number three. Despite its potential to seem like a trope, it serves as one of the most effective ways to structure drama, offering a versatile and powerful tool in crafting engaging narratives, particularly in the realm of action movies and science fiction.

Anatomy of a Scene: Using the "Rule of Three" in Action Sequences - ScreenCraft (2024)
Top Articles
Latest Posts
Article information

Author: Kimberely Baumbach CPA

Last Updated:

Views: 6463

Rating: 4 / 5 (41 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Kimberely Baumbach CPA

Birthday: 1996-01-14

Address: 8381 Boyce Course, Imeldachester, ND 74681

Phone: +3571286597580

Job: Product Banking Analyst

Hobby: Cosplaying, Inline skating, Amateur radio, Baton twirling, Mountaineering, Flying, Archery

Introduction: My name is Kimberely Baumbach CPA, I am a gorgeous, bright, charming, encouraging, zealous, lively, good person who loves writing and wants to share my knowledge and understanding with you.