How to Connect a Nintendo Switch Console to a TV (2024)

FAQs

How to Connect a Nintendo Switch Console to a TV? ›

Connect one end of the HDMI cable to the bottom terminal of the dock, labeled "HDMI OUT", then connect the other end to an HDMI port on your television or monitor. Close the back cover of the Nintendo Switch dock. Remove the left and right Joy-Con controllers from the console.

Verify you are using the correct input on the TV. If you are using a dock with a built-in LAN port, update the dock to the latest firmware. Lower or adjust the TV Resolution settings on the console. Try a different HDMI port on the TV.

Can you connect a Nintendo Switch to a TV wirelessly? Nope, it only offers HDMI video output, and requires the dock, or another compatible USB-C to HDMI adapter that can also accept power input (since it goes into high-power mode when connected to a TV).

Connect the mini-USB A/B connector of the console cable to the USB console port on the MPU of the switch. NOTE: If two MPUs are installed on the switch, log in through the console port or USB console port on the active MPU (typically with a smaller slot number) for the first login.

USB C to HDMI Cable for Nintendo Switch TV NS/OLED/Dock Adapter, 4K HD, 6.6FT Charger Cord, Compatible with Mobile Phones and laptops with DP Function for Projection, Type C Connector.

Connect an HDMI cable from the HDMI switch's output port to an HDMI port on your TV. Connect the switch's power supply to power. Attach the devices to the HDMI ports on the HDMI switch. You can then use the switcher to change between devices.

Check your HDMI cable connections. Disconnect the HDMI cable from your source device and the TV and then reconnect making sure the connection is secure. If the issue continues, try using a different or new HDMI cable.

If power doesn't seem to be an issue, it is also advisable to check for any fluctuations or power surges that could be causing your TV to malfunction. At a time like this, it is best to unplug it from the wall socket and wait for the flow to normalise.

Make sure the TV is set to the correct video input to receive the HDMI signal. Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Be sure to check which input on the TV you are connecting to.

Check Your Dock's Cables

Make sure all of the cables are plugged in tightly and that the cables are not damaged. If you notice any visible wear and tear on the cables, replace them with new ones. If your dock's power cable is worn out, purchase an official Nintendo Switch replacement cable.

How do I connect my Nintendo Switch to my TV without signal? ›

Connect one end of the HDMI cable into the bottom terminal of the dock labeled "HDMI OUT", then connect the other end into an HDMI port on your television or monitor. Close the back cover of the Nintendo Switch dock.

Verify you are using the correct input on the TV set. Lower or adjust the TV Resolution settings on the console. Use a different HDMI port on the TV. Use a different HDMI cable.

Connect an Ethernet cable to the Nintendo Switch dock with LAN port and then connect the other end of the Ethernet cable to your router or gateway. Place the Nintendo Switch console into the Nintendo Switch dock. On the Nintendo Switch console, select System Settings on the HOME Menu.

Power Output: The Nintendo Switch can accept a USB-C charger with a power delivery (PD) profile of 15V/2.6A. This means the charger should provide a voltage of 15 volts and a current of 2.6 amps. Make sure the USB-C charger you intend to use provides these specifications or something similar.

Your new system comes with everything you need to pop in a game and play, including: Nintendo Switch console. Nintendo Switch dock. 1 Joy-Con™ (L) controller, 1 Joy-Con™ (R) controller.